 |
|
当前位置:首页>>热门考试>>思科认证>>思科考试认证（ＣＩＳＣＯ）CCNA认证 笔试和实验内容!(1) |
|
思科考试认证（ＣＩＳＣＯ）CCNA认证 笔试和实验内容!(1) |
| 来源:www.stu88.com 时间:2006-04-01 |
|
CCNA ( Cisco Certified Network Associate) Certification Exam Objectives
The CCNA (640-407) exam will consist of a combination of the following objectives:
1) Identify and describe the functions of each of the seven layers of the OSI reference model.
2) Describe connection-oriented network service and connectionless network service, and identify the key differences between them.
3) Describe data link addresses and network addresses, and identify the key differences between them.
4) Define and describe the function of a MAC address.
5) Define flow control and describe the three basic methods used in networking.
6) Differentiate between the following WAN services: Frame Relay, ISDN/LAPD, HDLC, & PPP.
7) Log into a router in both user and privileged modes.
8) Use the context-sensitive help facility.
9) Use the command history and editing features.
10) Examine router elements (RAM, ROM, CDP, show).
11) Manage configuration files from the privileged exec mode.
12) Control router passwords, identification, and banner.
13) Identify the main Cisco IOS commands for router startup.
14) Check an initial configuration using the setup command.
15) Copy and manipulate configuration files.
16) List the commands to load Cisco IOS software from: flash memory, a tftp server, or ROM.
17) Prepare to backup, upgrade, and load a backup Cisco IOS software image.
18) List the key internetworking functions of the OSI Network layer and how they are performed in a router.
19) Describe the two parts of network addressing, then identify the parts in specific protocol address examples.
20) List problems that each routing type encounters when dealing with topology changes and describe techniques to reduce the number of these problems.
21) Explain the services of separate and integrated multiprotocol routing.
22) Describe the different classes of IP addresses [and subnetting].
23) Configure IP addresses.
24) Verify IP addresses.
25) Prepare the initial configuration of your router and enable IP.
26) Add the RIP routing protocol to your configuration.
27) Add the IGRP routing protocol to your configuration.
28) List the required IPX address and encapsulation type.
29) Enable the Novell IPX protocol and configure interfaces.
30) Monitor Novell IPX operation on the router.
31) Recognize key Frame Relay terms and features.
32) List commands to configure Frame Relay LMIs, maps, and subinterfaces.
33) List commands to monitor Frame Relay operation in the router.
34) Identify PPP operations to encapsulate WAN data on Cisco routers.
CCNA Practice Lab
Virtualrack services
Virtualrack.com is sponsored by The RE/COM Group.
Remote router rental for training, practice or pre-deployment testing.
Reasonable rates.
CCIE on staff.
Cisco router sales, installation and support.
Network consulting services.
Visit our website at www.virtualrack.com to learn more.
Navigation
Clicking on the words in red will either move you to that section or to an external web page.
Simple Multiprotocol Lab
Objective
Audience
Getting started
Required equipment
Scenario
Step by step instructions
Network diagram
Solution
References
Cisco links
Non-Cisco links
Books
Contact Information
Telephone
Email
Simple Multiprotocol Lab
Objective
Our goal is to successfully configure our new Cisco routers. The network
diagram has all the protocols, networks and addresses listed on it.
This network will have IP, IPX, Appletalk RTMP/EIGRP, IP IGRP, IPX
RIP/EIGRP, and an IP Extended access-list. See the Scenario (below) for full
details.
Audience
This exercise is geared toward those people working toward their CCNA
certification, and those who have little or no router experience. 共8页: 1 [2] [3] [4] [5] [6] [7] [8] 
下一篇：Cisco网络学院教程笔记
| |
| [编辑：煮酒论剑] [打印本页] [返回顶部↑] |
|
|
|
|
|
|
|
